Les meubles à panneaux se réfèrent à des meubles modulaires démontrés avec des panneaux à base de bois comme substrat principal et des panneaux comme structure de base. Les panneaux artificiels communs comprennent le contreplaqué, le panneau de bloc, le panneau de particules et le MDF. Le contreplaqué (plaqué) est souvent utilisé pour fabriquer des meubles nécessitant une flexion et une déformation ; la performance du panneau de bloc est parfois affectée par le matériau de base ; le panneau de particules (également appelé panneau de particules, panneau de bagasse) est lâche et n’est utilisé que pour les meubles de faible qualité. Le plus rentable, le plus couramment utilisé est le panneau de fibres de densité moyenne (MDF). Les matériaux de finition courants pour les meubles de panneau sont du bois mince (communément appelé placage), du papier à grain de bois (communément appelé autocollant), de la feuille de caoutchouc en PVC, de la surface de peinture en polyester (communément appelée peinture de cuisson). Les panneaux artificiels courants comprennent les panneaux parfumés, le contreplaqué, le panneau de bloc, le panneau de particules et le MDF.
1. Advantages of panel furniture
Fully effective use of wood disassembly and assembly, convenient production cycle, stable shape, stable shape, and not easy to be deformed
2, the disadvantages of panel furniture
(1) Not environmentally friendly
In order to obtain more benefits, some merchants produce inferior materials such as particleboard, and whether the veneers are all wrapped in furniture, it is easy to release formaldehyde harmful to the human body, which is not formal enough in environmental protection.
(2) non-natural
The biggest difference between the material used for panel furniture and the material of solid wood furniture lies in the naturalness of the material. Most of the current panel furniture is veneer design, which has repeated patterns and lacks the natural feeling of natural materials.
3. Cleaning and maintenance of panel furniture
a. Place it smoothly
The floor of the panel furniture must be kept flat and the four legs balanced. If the furniture is placed in a state of frequent swaying and unstable after being placed, the hoe or the fastener will fall off and the bonding part will be cracked, which will affect the use effect and reduce the life of the furniture. In addition, if the ground is soft and the furniture is unbalanced, do not use wooden boards or iron sheets to cushion the furniture legs. Even if it is balanced, it will be difficult to evenly distribute the force. If it will last for a long time, it will damage the internal structure of the furniture. The only way to compensate is to trim the floor, or use it slightly. A large area of hard rubber sheet is laid on the south side to make the furniture legs stand smoothly.
b. Remove dust
It is best to use a cotton knit cloth to remove dust from the furniture, and then use a soft wool brush to remove dust from the embossed or embossed pattern. Painted furniture should not be wiped with gasoline or organic solvents. It can be wiped with colorless furniture glazing to enhance the gloss and reduce dust.
c. Avoiding the sun
It is best not to be exposed to direct sunlight in the position of the furniture. Frequent sun exposure will fade the furniture paint film, metal parts will be easily oxidized and deteriorated, and the wood will be brittle. Summer is best to cover the sun with curtains to protect the furniture.
d. Indoor humidity
Just keep the indoor humidity and don’t let the furniture get wet. In the spring and autumn, the humidifier should be used to limit the time to prevent the furniture from being damaged due to excessive humidity, such as wood decay, rusting of metal parts, and easy opening of the adhesive parts. Usually, wash the furniture as little as possible, and avoid using alkaline water. It should only be wiped with a damp cloth with water and then wiped clean with a dry cloth.
