Manufacturers supply dining chairs, dining room furniture

Tables and chairs are chairs for dining and are a kind of dining furniture.

According to the material of the dining chair: solid wood chair, steel wood chair, curved wood chair, aluminum alloy chair, metal chair, rattan chair, plastic chair, fiberglass chair, acrylic chair, plate chair, wooden chair, baby dining chair and circle chair, etc.

The biggest advantage of the solid wood chair is the natural wood grain and the natural color that changes. Since solid wood is a constantly breathing organism, it is recommended to place it in a temperature and humidity environment, while avoiding the presence of beverages, chemicals or overheated objects on the surface to avoid damaging the natural color of the wooden surface. If it is a beautiful plate material, when there is more dirt, use a diluted neutral detergent with warm water to wipe it once, then wipe it with water. Remember to wipe off the residual water stain with a soft dry cloth. Then use the maintenance wax to polish, even if you're done, only pay attention to daily cleaning and maintenance, in order to make wood furniture last forever.

Maintenance and maintenance of solid wood dining chairs

1. Pay attention to the cleaning and maintenance of the dinette surface. Gently wipe off the surface dust with a soft cotton soft cloth. At intervals, use the wet cotton thread that wrings out the moisture to clean the dust on the corner of the table and chair, and then use a clean dry soft cotton cloth. wipe. Avoid removing stains with alcohol, benzine or other chemical solvents.

2. If the surface of the dining table and chair is stained, do not rub it hard. Use warm tea to remove the stain gently. After the water is evaporated, apply a little light wax to the original part, then gently wipe it several times to form a protective film.

3. Avoid scratching hard objects. When cleaning, do not touch the cleaning tool to the dinette. Usually, be careful not to let the hard metal products or other sharp objects collide with the dinette to protect the surface from scratches.

4. Avoid wet conditions. In the summer, if the room is flooded, a thin rubber pad should be used to separate the dinette from the ground, and the wall of the dinette should be kept at a distance of 0.5-1 cm from the wall.

5. Keep away from heat. In the winter, it is best to place the dining table and chair at a distance of about 1 meter from the heating flow to avoid long-term baking, causing local cracking of the wood, deformation and deformation, and local deterioration of the paint film.

6. Avoid direct sunlight. Try to avoid the long-term exposure of the outdoor sun to the whole or part of the dinette, so it is best to place it in a place where you can avoid the sun. In this way, it does not affect indoor lighting, but also protects the indoor dining table and chair.