KFC McDonald's fast dining table and chair installation method

KFC and McDonald's table materials are fireproof veneer, PVC edge banding, stainless steel or spray. The chair is a curved wooden chair. Generally divided into conjoined and separated. The split is moved and fixed. If you move, it is a circular chassis or a rectangular chassis for 4 people. Fix it by fixing the expansion screw to the floor. The dinette manufacturer will distribute all the accessories screws and so on. According to the use of electric drills, wrenches, screws, nuts, gaskets, expansion screws, etc. The table packaging is separately packaged on the table top, brackets, chairs, and accessories. The conjoined table is first fitted with a countertop. First, unpack the table top and the bracket, spread the paper on the floor with the wrapped paper, prevent the table from scratching, put the table top up, face down, place the bracket on the table top connection position, use the screws Fixed, installation attention 4 sides are relatively balanced. The table top is installed, and it is turned upside down, and the chair surface is covered. The same is true for the split table. A fixed table is to use an electric drill to drill the expansion screws on the floor.

  Installation precautions: Table top, the seat surface is protected from being scratched by sharps or the ground. Adding space does not allow fixed tables and chairs, that is, you cannot use expansion screws. The table top is left and right, and the front and back are symmetrical.